Component Testing
- Disconnect the harness connector at the right steering wheel control switch.
- Connect a DMM between terminals 3 and 6 of the right steering wheel control switch.
- If any of the resistance measurements for the individual switches are not within the specified resistance values, replace the right steering wheel control switch.
| Function Switch | Minimum Resistance Value | Maximum Resistance Value |
|---|---|---|
| Scroll Wheel Up | 60.8 Ohms | 64.8 Ohms |
| Scroll Wheel Down | 160.5 Ohms | 164.5 Ohms |
| Up Key/Station Seek | 359.7 Ohms | 363.7 Ohms |
| Down Key/Station Seek | 919 Ohms | 923 Ohms |
| No Switch Pressed | O.L. | O.L. |