Removal Procedure
- Open the hood.
- Disconnect the battery.
- Remove the ground connection from the ground terminal.
- Loosen the nut.
- Raise the vehicle by its full height.
- Remove the ground cable (1) from starter.
Remove the nut.
- Remove the 2 positive cable (2) starter.
Remove the 2 nuts.
- Remove the intake manifold bracket (2).
- Disconnect the wiring harness plug of the catalytic converter control oxygen sensor.
- Disconnect the wiring harness plug (1) from the bracket.
- Remove the 2 bolts (3).
- Remove the starter.
Remove the 2 bolts (1, 2).
WARNING:
Refer to Battery Disconnect Warning
.