Installation Procedure

Fig 1: Generator Battery Control Module

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Install the generator battery control module bolts (1).
Tighten: Tighten the bolts to 8 N.m (71 lb in).

Fig 2: Generator Battery Control Module Nut

Courtesy of GENERAL MOTORS CORP.

Position the generator battery temperature sensor wiring harness and the battery cables to the generator control module.
Connect the generator battery temperature sensor wiring harness electrical connectors (5, 6) to the generator control module.
Install the battery cable (4), and the generator battery control module nut (3) to the stud.
Tighten: Tighten the nut to 8 N.m (71 lb in).
Install the battery cable (2), and the generator battery control module nut (1) to the stud.
Tighten: Tighten the nut to 8 N.m (71 lb in).

Fig 3: Locating Generator Battery Components

Courtesy of GENERAL MOTORS CORP.

Install the 3 small wire terminal leads to the batteries.
Install the generator battery cable leads (3, 4, 5) to the batteries.
Install the generator battery cable nuts (2).
Tighten: Tighten the nut to 8 N.m (71 lb in).
Install the generator battery terminal covers (1).

Fig 4: View Of Generator Battery Cover

Courtesy of GENERAL MOTORS CORP.

Fig 5: Locating Generator Battery Cover Components

Courtesy of GENERAL MOTORS CORP.

Install the 12 generator battery cover bolts (1).
Tighten: Tighten the bolts to 8 N.m (71 lb in).
Install the 2 generator battery fan bolts (2).
Tighten: Tighten the bolts to 8 N.m (71 lb in).
Install the generator battery wiring harness to the clip (3) on the generator battery cover.
Install the generator battery carrier. Refer to Generator Battery Carrier Replacement .
Connect the hybrid battery. Refer to Hybrid Battery Service Disconnect/Connect .