LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2008 >> Vue Red Line, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1285 (Engine Controls And Fuel - 3.6L - Repair Instructions) >> Repair Instructions >> Fuel Level Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Fuel Tank Module Assembly Components
    GM1796305Courtesy of GENERAL MOTORS CORP.
  1. Connect the fuel level sensor electrical connector to the pump module electrical connector.
  2. Align the tab opening on the rear of the fuel level senor with the module alignment feature (3).
  3. Press the tab (1) on the sensor out away from the sensor securing the sensor to the module.
  4. Install the fuel level sensor wiring harness to the clip (2) on the module.
  5. Install the fuel tank module assembly. Refer to Fuel Tank Module Replacement .
scientia non olet · About LEMON Manuals