LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2008 >> Vue Red Line, AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Diagnostic Information and Procedures >> DTC P0622 >> Circuit/System Testing

Circuit/System Testing

  1. Ignition OFF, disconnect the harness connector at the generator.
  2. Ignition ON, connect a test lamp to B+ and repeatedly probe the generator field duty cycle circuit terminal 2, harness side, while monitoring the scan tool ECM GEN-F Terminal Signal parameter. The reading should change from 0 percent to greater than 95 percent.
    • If the parameter was not affected by the test lamp, test the circuit for a short to voltage, short to ground, or an open/high resistance. If the circuit tests normal, replace the ECM.
  3. If the circuit tests normal, replace the generator.
scientia non olet · About LEMON Manuals