Fastener Tightening Specifications
WARNING: This page is about a different car, the 2006 Cadillac DTS and 2006 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Description of Usage | Ref No.* | Qty | Size | Specification | |
|---|---|---|---|---|---|
| Metric | English | ||||
| Accumulator Housing | 956 or 957 | 5 | M6x1.0x20.0 | 8-14 N.m | 6-10 lb ft |
| Accumulator Housing to Channel Plate | 534 | 1 | M6x1.0x20.0 | 8-14 N.m | 6-10 lb ft |
| Accumulator Housing to Channel Plate | 951 | 1 | M6x1.0x50.0 | 8-14 N.m | 6-10 lb ft |
| Accumulator Housing to Channel Plate | 952 | 3 | M6x1.0x28.0 | 8-14 N.m | 6-10 lb ft |
| Accumulator Housing to Channel Plate | 954 | 1 | M6x1.0x25.0 | 8-14 N.m | 6-10 lb ft |
| Bottom Pan to Case | 62 | 16 | M6x1.0x17.0 | 10-12 N.m | 8-9 lb ft |
| Case Cover to Case | 46 | 8 | M8x1.25x14.0 | 20-27 N.m | 15-20 lb ft |
| Case Cover to Case | 47 | 2 | M8x1.25x14.0 | 27-31 N.m | 20-23 lb ft |
| Case Cover to Case | 49 | 1 | M8x1.25x14.5 | 27-31 N.m | 20-23 lb ft |
| Case Cover to Case | 50 | 11 | M8x1.25x14.0 | 27-31 N.m | 20-23 lb ft |
| Case Cover to Case (Stud) | 45 | 1 | M8x1.25x14.8 | 20-27 N.m | 15-20 lb ft |
| Case Cover to Case (Stud) | 67 | 2 | M6x1.0x21.0 | 27-31 N.m | 20-23 lb ft |
| Case Cover to Driven Sprocket Support | 48 | 3 | M8x1.25x17.0 | 20-27 N.m | 15-20 lb ft |
| Case Extension to Case | 128 | 4 | M10x1.5x35.0 | 50-55 N.m | 37-40 lb ft |
| Case Extension to Case | 129 | 1 | M8x1.25x30.0 | 20-27 N.m | 15-20 lb ft |
| Case Extension to Case (Stud) | 127 | 1 | M10x1.5x35.0 | 50-55 N.m | 37-40 lb ft |
| Case to Forward Clutch Support | 5 | 2 | M8x1.25x16.0 | 25-27 N.m | 19-20 lb ft |
| Channel Plate to Accumulator Housing | 534 | 1 | M6x1.0x20.0 | 8-14 N.m | 6-10 lb ft |
| Channel Plate to Case | 534 | 2 | M6x1.0x20.0 | 8-14 N.m | 6-10 lb ft |
| Channel Plate to Case | 958 | 15 | M6x1.0x20.0 | 8-14 N.m | 6-10 lb ft |
| Channel Plate to Case (Nut) | 955 | 2 | M8x1.25 | 8-14 N.m | 6-10 lb ft |
| Channel Plate to LCVB | 534 | 9 | M6x1.0x20.0 | 8-14 N.m | 6-10 lb ft |
| Cooler Connector to Cooler (Case Cover) | 38 | - | - | 20-27 N.m | 15-20 lb ft |
| Cooler Connector (Return) to Case | 3 | 1 | - | 25-29 N.m | 19-21 lb ft |
| Detent Lever to Roller Assembly | 26 | 1 | M6x1.0x35.0 | 8-14 N.m | 8-10 lb ft |
| Differential to Final Drive Carrier | 119 | - | M10x1.0x35.0 | 70-76 N.m | 50-56 lb ft |
| Drive Sprocket Support to Case | 404 | 6 | M6x1.0x14.0 | 11-13 N.m | 8-9.5 lb ft |
| Input Speed Sensor to Case | 15 | 1 | M6x1.0x | 11-13 N.m | 8-9.5 lb ft |
| Internal Mode Switch (IMS) to Channel Plate | 939 | 3 | M5x1.0x14.0 | 8-14 N.m | 8-10 lb ft |
| LCVB to Channel Plate | 940 | 4 | M6x1.0x35.0 | 8-14 N.m | 6-10 lb ft |
| LCVB to Channel Plate | 938 | 3 | M6x1.0x40.0 | 8-14 N.m | 6-10 lb ft |
| Manual Shaft to Detent Lever (Nut) | 18 | 1 | M6x1.5 | 27-34 N.m | 20-25 lb ft |
| Oil Drain-Bottom Pan to Case | 8 | 1 | 1/8 27NPTF | 8-14 N.m | 6-10 lb ft |
| Oil Test-#40 TORX® (Case Cover) | 40 | - | - | 18-26 N.m | 13.5-19 lb ft |
| Oil Transfer Plate to Case | 534 | 8 | M6x1.0x20.0 | 8-14 N.m | 6-10 lb ft |
| Pressure Control Solenoid Bracket to UVCB | 15 | 1 | M5x1.0x12.5 | 11-13 N.m | 8-9.9 lb ft |
| Pump Assembly to Case | 229 | 3 | M5x1.0x17.0 | 11-13 N.m | 8-9.9 lb ft |
| Pump Assembly to Case | 231 | 2 | M6x1.0x19.5 | 11-13 N.m | 8-9.9 lb ft |
| Pump Assembly to Case Cover | 232 | 5 | M6x1.0x13.25 | 11-13 N.m | 8-9.9 lb ft |
| Pump Assembly to Case Cover | 233 | 5 | M6x1.0x19.0 | 11-13 N.m | 8-9.9 lb ft |
| Scavenge Lube to Case | 15 | 1 | M6x1.0x | 8-14 N.m | 8-10 lb ft |
| Scavenger Pump Cover to Scavenger Pump Body | 226 | 3 | M6x1.0x20.0 | 11-13 N.m | 8-9.9 lb ft |
| Secondary Pump to Case Cover | 234 | 1 | M6x1.0x28.0 | 11-13 N.m | 8-9.9 lb ft |
| Secondary Pump to Case Cover | 235 | 2 | M6x1.0x16.0 | 11-13 N.m | 8-9.9 lb ft |
| Secondary Pump to Case Cover | 331 | 1 | M6x1.0x40.0 | 11-13 N.m | 8-9.9 lb ft |
| Servo Cover to Case | 534 | 3 | M6x1.0x20.0 | 11-13 N.m | 8-9.5 lb ft |
| Side Cover to Case | 28 | 8 | M8x1.5x15.0 | 50-55 N.m | 37-40 lb ft |
| Side Cover to Case | 32 | 1 | M6x1.5x15.0 | 20-27 N.m | 15-20 lb ft |
| Side Cover to Case (Stud) | 66 | 1 | M8x1.5x15.0 | 50-55 N.m | 37-40 lb ft |
| Speed Sensor to Case Extension | 131 | 1 | M6x1.0x11.8 | 8-14 N.m | 6-10 lb ft |
| Temperture Sensor | 350 | 1 | - | 3.4 N.m | 30 lb in |
| UCVB to Case | 229 | 1 | M6x1.0x15.0 | 11-13 N.m | 8-9.9 lb ft |
| UCVB to Case | 331 | 5 | M5x1.0x40.0 | 11-13 N.m | 8-9.9 lb ft |
| UCVB to Case Cover | 329 | 1 | M5x1.0x50.0 | 11-13 N.m | 8-9.9 lb ft |
| UCVB to Case Cover | 330 | 2 | M5x1.0x39.0 | 11-13 N.m | 8-9.9 lb ft |
| UCVB to Driven Sprocket Support | 331 | 6 | M5x1.0x40.0 | 11-13 N.m | 8-9.9 lb ft |
| * Reference Number refers to the callout number on the disassembled view. | |||||