Fastener Tightening Specifications
WARNING: This page is about a different car, the 2012 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Lower Control Arm to Knuckle Bolt and Nut | ||
|
60 N.m | 44 lb ft |
|
+ 70° | |
| Lower Control Arm to Support Assembly Bolt and Nut | 110 N.m | 81 lb ft |
| Rear Park Brake Cable Routing Bolt | 10 N.m | 89 lb in |
| Shock Absorber to Body Nuts | 25 N.m | 18 lb ft |
| Shock Absorber to Knuckle Bolt | 180 N.m | 133 lb ft |
| Stabilizer Shaft Insulator Bracket Bolts | 35 N.m | 26 lb ft |
| Stabilizer Shaft Link to Knuckle Bolt | 55 N.m | 41 lb ft |
| Support Assembly to Body Bolts | ||
|
100 N.m | 74 lb ft |
|
+ 30° | |
| Toe Link to Steering Knuckle Bolt and Nut | ||
|
110 N.m | 81 lb ft |
|
+ 70° | |
| Toe Link to Support Bolt and Nut | 110 N.m | 81 lb ft |
| Trailing Arm Bracket to Body Bolts | ||
|
90 N.m | 66 lb ft |
|
+ 30° | |
|
+ 15° | |
| Trailing Arm to Bracket Through Bolt and Nut | ||
|
60 N.m | 44 lb ft |
|
+ 60° | |
| Trailing Arm to Knuckle Bolts | 180 N.m | 133 lb ft |
| Upper Control Arm to Knuckle Bolt and Nut | ||
|
110 N.m | 81 lb ft |
|
+ 70° | |
| Upper Control Arm to Support Assembly Bolt and Nut | ||
|
60 N.m | 44 lb ft |
|
+ 60° | |
| Wheel Bearing/Hub Assembly Bolts | 63 N.m | 47 lb ft |