Installation Procedure

WARNING: This page is about a different car, the 2010 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Generator Battery Temperature Sensor

Courtesy of GENERAL MOTORS CORP.

If required, install the generator battery temperature sensor to the battery.

Fig 2: View Of Generator Battery Bolts

Courtesy of GENERAL MOTORS CORP.

Install the generator battery (1).

CAUTION: Refer to Fastener Caution .

Install the generator battery bolts.
Tighten: Tighten the bolts to 10 N.m (89 lb in).

Fig 3: View Of Generator Battery Cables & Batteries

Courtesy of GENERAL MOTORS CORP.

Install the generator battery cables (1-4) to the batteries.

Fig 4: Generator Battery Nuts

Courtesy of GENERAL MOTORS CORP.

Install the generator battery cable nuts (1-4) to the battery cable terminals.
Tighten: Tighten the nuts to 8 N.m (71 lb in).
Install the generator battery temperature sensor wiring harness. Refer to Generator Battery Temperature Sensor Wiring Harness Replacement .