LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2008 >> Vue Green Line >> Repair and Diagnosis >> Brakes >> Anti-Lock Brake System, Traction Control System & Stability Control System >> Repair Instructions >> Brake Pressure Modulator Valve Bracket Replacement >> Removal Procedure

Removal Procedure

  1. Place the ignition switch in the OFF position.
  2. Remove the underhood electrical center. Refer to Underhood Electrical Center or Junction Block Replacement .
    3. Fig 1: BPMV Bolt
    GM1873930Courtesy of GENERAL MOTORS CORP.
  3. Remove the brake pressure modulator valve (BPMV) bolt (1).
    4. Fig 2: BPMV Assembly
    GM1873931Courtesy of GENERAL MOTORS CORP.
  4. Without disconnecting the brake pipe fittings, carefully lift the BPMV assembly (1) upward to release the mounting pins from the BPMV bracket insulators.

    Do not pry on the accumulator caps on the underside of the BPMV.

  5. Position the BPMV assembly aside and secure with heavy mechanics wire or equivalent.
    6. Fig 3: BPMV Bracket Bolts
    GM1873934Courtesy of GENERAL MOTORS CORP.
  6. Remove the 2 BPMV bracket bolts (1).
    7. Fig 4: BPMV Bracket Nut
    GM1873935Courtesy of GENERAL MOTORS CORP.
  7. Remove the BPMV bracket nut (1) and the BPMV bracket.
  8. Inspect the insulators for damage and replace, if necessary.
scientia non olet · About LEMON Manuals