LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2008 >> Sky Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Object Detection System) >> Repair Instructions >> Information Center Telltale Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Positioning Fingers Between Headliner & Information Center Telltale Assembly Bezel
    GM491154Courtesy of GENERAL MOTORS CORP.
  1. Insert your fingers between the headliner and the information center telltale assembly bezel. Gently pull down to release the display bezel.
    2. Fig 2: Pressing Down On Lock Tab On Telltale Assembly
    GM491156Courtesy of GENERAL MOTORS CORP.
  2. Use a screwdriver to release the locking tab at the rear of the telltale assembly.
    3. Fig 3: View Of Information Center Telltale Assembly
    GM491157Courtesy of GENERAL MOTORS CORP.
  3. Tilt the display down. Pull down to remove.
  4. Disconnect the electrical connector.
scientia non olet · About LEMON Manuals