LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2008 >> Sky Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Object Detection System) >> Diagnostic Information & Procedures >> DTC B0968 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2008 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, observe the scan tool Sensor Voltage Feed Output parameter. The reading should be between 8.0 V-9.0 V.
  2. Perform the appropriate LED Test, using the scan tool. Observe the operation of the appropriate LEDs. All LEDs should illuminate.
scientia non olet · About LEMON Manuals