Installation Procedure
- Install the microphone.
- Install in the microphone.
- Connect the wiring harness plug.
- Connect the compact plug.
- Install the interior lamp holder.
- Install the 4 retaining lugs.
Tighten: Tighten the 2 screws to 2.5 N.m (22 lb in).
- Connect the wiring harness plug into the holder.
- Connect and lock the 2 wiring harness plugs.
- Install the 4 retaining lugs.
- Install the panel for the sunshade actuation switch.
- Install the microphone cover.
- Install the lens for the front interior lamp.
NOTE:
Refer to Fastener Notice
.