LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2008 >> Astra XE, Standard >> Repair and Diagnosis >> Brakes >> Anti-Lock Brake System, Traction Control System & Stability Control System >> Repair Instructions >> Brake Pressure Modulator Valve Bracket Replacement >> Removal Procedure

Removal Procedure

  1. Remove the cover of the brake fluid reservoir.
  2. Siphon out as much brake fluid as possible with a siphon bottle.
    3. CAUTION: Refer to Battery Disconnect Caution .
  3. Disconnect the battery.
    4. Fig 1: View Of Battery Shield And Bolts
    GM1998474Courtesy of GENERAL MOTORS CORP.
  4. Remove the battery shield (2).
    • Remove the bolt (3).
    • Remove the 2 shields (1) from the battery tray.
    5. Fig 2: View Of Battery Holder Bolt
    GM1941092Courtesy of GENERAL MOTORS CORP.
  5. Remove the battery holder (1) and remove the bolt.
  6. Remove the battery.
    7. Fig 3: View Of Batter Tray Cable Ties And Bolts
    GM1936907Courtesy of GENERAL MOTORS CORP.
  7. Remove the battery tray.
    • Remove the 2 cable ties (1).
    • Remove the 3 bolts (2).
    8. IMPORTANT: The cooling system remains sealed.
  8. Remove the coolant surge tank.
    • Disconnect the wiring harness plug.
    • Set the coolant surge tank aside.
    9. Fig 4: View Of Hydraulic Modulator Hydraulic Lines And Bolts
    GM1937847Courtesy of GENERAL MOTORS CORP.
  9. Remove the hydraulic modulator.
    • Disconnect the hydraulic modulator wiring harness plug.
    • Remove the 6 hydraulic lines (2).
    • Remove the 3 bolts (1).
    10. Fig 5: View Of Hydraulic Modulator Bracket Bolts
    GM1937848Courtesy of GENERAL MOTORS CORP.
  10. Remove the hydraulic modulator bracket.
    • Remove the 3 bolts (1).
    • Remove the hydraulic modulator bracket.
scientia non olet · About LEMON Manuals