LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2008 >> Astra XE, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - Introduction (2 Of 2) >> Repair Instructions >> Heated Oxygen Sensor 2 Replacement >> Installation Procedure

Installation Procedure

    NOTE: Refer to Fastener Notice .
    IMPORTANT: When re-using the oxygen sensor, coat the thread of the oxygen sensor with assembly paste (white).
  1. Install the oxygen sensor 2 in the front exhaust pipe using SA9603E  /KM-6179. See Special Tools .

    Tighten:  Tighten to 40 N.m (30 lb ft).

  2. Connect the wiring harness plug for the oxygen sensor.
  3. Install the wiring harness.
scientia non olet · About LEMON Manuals