LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2008 >> Astra XE, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - Introduction (2 Of 2) >> Repair Instructions >> Heated Oxygen Sensor 1 Replacement >> Installation Procedure

Installation Procedure

    NOTE: Refer to Fastener Notice .
  1. Install the oxygen sensor 1.

    Tighten:  Tighten the oxygen sensor to 40 N.m (30 lb ft).

    • Connect the wiring harness into the bracket.
    • Install the wiring harness plug.
  2. Connect the battery.

    Install the ground connection to ground terminal.

    Tighten:  Tighten the nut to 5 N.m (44 lb in).

  3. For programming procedures, refer to Control Module References .
  4. Close the hood.
scientia non olet · About LEMON Manuals