LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2008 >> Astra XE, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - Introduction (2 Of 2) >> Repair Instructions >> Camshaft Position Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Open the hood.
    2. Fig 1: View Of Wiring Harness Plug, Camshaft Position Sensor Of The Intake Camshaft/Exhaust Camshaft And Wiring Harness Connector
    GM1945807Courtesy of GENERAL MOTORS CORP.
  2. Remove the camshaft position sensor of the intake camshaft (2).
    • Disconnect the wiring harness plug (1).
    • Remove the bolt.
  3. Remove the camshaft position sensor of the exhaust camshaft (4).
    • Disconnect the wiring harness connector (3).
    • Disconnect the wiring harness of the oxygen sensor from the bracket.
    • Remove the bolt.
scientia non olet · About LEMON Manuals