Removal Procedure

WARNING: This page is about a different car, the 2006 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View of Radio & Screws

Courtesy of GENERAL MOTORS CORP.

Remove the I/P center trim bezel. Refer to Trim Bezel Replacement - Center in Instrument Panel, Gages, and Console.
Remove the radio screws.

Fig 2: View of Radio Electrical Connectors & Antenna

Courtesy of GENERAL MOTORS CORP.

Disconnect the radio electrical connectors and the antenna.Slightly push the antenna lead toward the radio to relieve tension on the internal fingers. Then pull back on the spring-loaded locking ring and remove the connector from the radio.
Remove the radio.

Fig 3: View of Ground Strap
Courtesy of GENERAL MOTORS CORP.