LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2007 >> Vue Red Line, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Power Steering System) >> Repair Instructions >> Power Steering Gear Heat Shield Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the heat shield to the frame.
    2. Fig 1: Removing Steering Gear-To-Frame Bolts & Nuts
    GM891603Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the steering gear heat shield to frame bolts.

    Tighten:  Tighten the bolts to 4 N.m (35 lb in).

  3. Lower the vehicle.
scientia non olet · About LEMON Manuals