LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2007 >> Vue Red Line, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 169 (Body Front End) >> Repair Instructions >> Hood Latch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the hood latch release cable to the hood latch.
  2. Position the hood latch to the alignment marks on the support bracket.
  3. Install the hood latch bolts.
    Fig 1: Removing/Installing Hood Latch Bolts
    GM930866Courtesy of GENERAL MOTORS CORP.
  4. Tighten the hood latch bolts.
  5. NOTE: Refer to Fastener Notice in Cautions and Notices.
  6. Slowly close the hood and check latch operation.
  7. Open the hood.

    Tighten:  Tighten the bolts to 10 N.m (89 lb. in.).

  8. Close the hood.