LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2007 >> Vue Red Line, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Steering Wheel & Steering Column) >> Repair Instructions >> Ignition Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Ignition Switch
    GM881945Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connectors.
  2. Position the ignition switch.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the ignition switch fasteners.

    Tighten:  Tighten the ignition switch fasteners to 1.5 N.m (13 lb in).

    4. Fig 2: Removing/Installing Steering Column Trim Covers
    GM870643Courtesy of GENERAL MOTORS CORP.
  4. Install the steering column upper trim cover. Refer to Steering Column Trim Covers Replacement .
  5. Install the lock cylinder bezel.
scientia non olet · About LEMON Manuals