LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2007 >> Vue Red Line, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1217 (Steering Wheel & Steering Column) >> Repair Instructions >> Steering Wheel Position Sensor Replacement >> Assembly Procedure

Assembly Procedure

WARNING: This page is about a different car, the 2010 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Intermediate Shaft
    GM1654921Courtesy of GENERAL MOTORS CORP.
  1. Slide the steering wheel position sensor into place and remove the locating pin.
  2. Connect any electrical connectors as needed.
  3. Connect the intermediate steering shaft to the steering column. Refer to Intermediate Steering Shaft Replacement .
  4. Remove anti-rotation pin J 42640  .
scientia non olet · About LEMON Manuals