LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2007 >> Vue Red Line, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1213 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Current Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Battery Current Sensor
    GM1891579Courtesy of GENERAL MOTORS CORP.
  1. Remove the negative battery cable. Refer to Battery Negative Cable Replacement (LAT)  or Battery Negative Cable Replacement (LE5 or LE9)  or Battery Negative Cable Replacement (LZ4 or LZE)  or Battery Negative Cable Replacement (LY7) .
  2. Ensure that the location measurement of the battery current sensor was recorded for reference during installation.
  3. Squeeze the ground ends of the negative battery cable together and remove the sensor (1) from the cable.
scientia non olet · About LEMON Manuals