LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2007 >> Vue Red Line, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1204 (Wiper System & Washer System) >> Repair Instructions >> Windshield Washer Solvent Container Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Solvent Container Washer Hose
    GM1331351Courtesy of GENERAL MOTORS CORP.
  1. Open the hood.
  2. Remove the washer container filler tube. Refer to Windshield Washer Solvent Container Filler Tube Replacement .
  3. Remove the front wheelhouse panel splash shield. Refer to Front Wheelhouse Panel Splash Shield Replacement .
  4. Disconnect the washer pump hose (1) from the windshield washer hose (2).
  5. Disengage the hose from the washer container.
  6. Drain the washer solvent in a suitable clean container.
    7. Fig 2: View Of Washer Level Sensor Electrical Connector
    GM1202069Courtesy of GENERAL MOTORS CORP.
  7. Disconnect the washer level indicator electrical connector (1).
  8. Disconnect the washer pump electrical connector (2).
  9. Remove the washer solvent container nuts (3).
  10. Remove the washer solvent container (4) from the left frame rail.
  11. Remove and transfer the following components from the washer solvent container:
scientia non olet · About LEMON Manuals