Front Passenger Window Switch
WARNING: This page is about a different car, the 2010 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness connector at the front passenger window switch.
- Test for infinite resistance between the control terminals G and F and the B+ terminal A with the switch in the INACTIVE position.
- If less than the specified value, replace the front passenger window switch.
- Test for less than 2 ohms between the control terminal G and the B+ terminal A with the switch in the UP position.
- If greater than the specified range, replace the front passenger window switch.
- Test for less than 2 ohms between the control terminal F and the B+ terminal A with the switch in the DOWN position.
- If greater than the specified range, replace the front passenger window switch.