LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2007 >> Vue Red Line, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1020 (Wiring Systems And Power Management - Introduction) >> Repair Instructions >> Ignition Switch Lock Cylinder Replacement

Ignition Switch Lock Cylinder Replacement

WARNING: This page is about a different car, the 2008 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Ignition Switch Lock Cylinder
GM1831198Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedure

  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (LZ4, LY7, and LE5) or Battery Negative Cable Disconnection and Connection (LAT) .
  2. Remove the knee bolster bracket. Refer to Driver Knee Bolster Bracket Replacement .
1 Ignition Switch Lock Cylinder
IMPORTANT: If you are installing a new ignition switch lock cylinder, refer to Key and Lock Cylinder Coding .

Procedure

  1. Turn the ignition switch lock cylinder to the run position.
  2. Using a flat bladed tool push the ignition switch lock cylinder lock tab to release it.
scientia non olet · About LEMON Manuals