Removal Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Refer to Brake Fluid Irritant Caution .

NOTE: Refer to Brake Fluid Effects on Paint and Electrical Components Notice .

Fig 1: View Of 2 Brake Pipes At Proportioning Valve

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: Use tape to label and mark the locations of the brake pipes in order to aid in installation.

Disconnect the 2 brake pipes (1) from the proportioning valve. Use bleeder valve caps or similar caps to plug the ends of the brake pipes in order to prevent brake fluid from draining out of the pipes and to avoid brake fluid contamination.

Fig 2: View Of 4 Brake Pipes At Proportioning Valve

Courtesy of GENERAL MOTORS CORP.

Disconnect the 4 brake pipes (1) from the proportioning valve. Use bleeder valve caps or similar caps to plug the ends of the brake pipes in order to prevent brake fluid from draining out of the pipes and to avoid brake fluid contamination.

Fig 3: View Of 2 Proportioning Valve Bracket Nuts

Courtesy of GENERAL MOTORS CORP.

Remove the 2 proportioning valve bracket nuts and remove the proportioning valve assembly from the vehicle.