LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2007 >> Vue Green Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 155 (Lighting Systems) >> Repair Instructions >> Stop Lamp Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Proper stoplamp switch adjustment is essential. Improper stoplamp switch adjustment may cause brake drag, heat buildup and excessive brake lining wear.
    IMPORTANT: Do NOT depress the brake pedal assembly during the stop lamp switch installation. This will cause a drag condition on the brake.
    IMPORTANT: Inspect the retainer to insure that the locking tabs have locked into position and the retainer is in place.
  1. Connect the electrical connectors on the stop lamp switch.
  2. Install the switch to the bracket by turning and pushing the switch until the switch bottoms on the brake pedal.
    Fig 1: View Of Stop Lamp Switch
    GM931241Courtesy of GENERAL MOTORS CORP.
    Fig 2: Removing/Installing Switch To The Bracket
    GM931292Courtesy of GENERAL MOTORS CORP.
  3. Inspect the stop lamps for proper operation
scientia non olet · About LEMON Manuals