LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2007 >> Vue Green Line >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System And TCS >> Repair Instructions >> Brake Pressure Modulator Valve Bracket Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of BPMV Bracket
    GM890992Courtesy of GENERAL MOTORS CORP.
  1. Install the BPMV assembly bracket to the vehicle.
    2. NOTE: Refer to Fastener Notice .
  2. Install the brake pressure modulator assembly bracket mounting bolts and nut.

    Tighten:  Tighten the bolts and nut to 10 N.m (89 lb in).

    3. Fig 2: Removing/Installing Brake Modulator Assembly To The Bracket
    GM927841Courtesy of GENERAL MOTORS CORP.
  3. Install the brake modulator assembly to the bracket.
  4. Tighten the 2 brake pressure modulator assembly insulator nuts.

    Tighten:  Tighten the nuts to 10 N.m (89 lb in).

    5. Fig 3: Disconnecting/Connecting Electrical Connector From Electronic Brake Control Module (EBCM)
    GM927847Courtesy of GENERAL MOTORS CORP.
  5. Connect the EBCM electrical connector.
    6. Fig 4: View Of Transmission Control Module
    GM927845Courtesy of GENERAL MOTORS CORP.
  6. Reposition the TCM, if equipped, to the mounting bracket.
scientia non olet · About LEMON Manuals