LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2007 >> Vue Base, 2.2 D, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Seat System) >> Repair Instructions >> Seat Switch Replacement - Power >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Am and 2004 Oldsmobile Alero. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Power Seat Switch, Electrical Connector & Switch Bracket Screw
    GM740550Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector (5) to the switch (3).
  2. Position the switch (3) to the seat cushion frame (2).
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the power seat switch bracket screw (4).

    Tighten:  Tighten the screw to 5 N.m (44 lb in).

  4. Adjust the seat cushion cover (1) to a desired appearance.

    Fasten the cushion cover (1) J-hook retainer.

    5. Fig 2: View Of Power Seat Switch & Bezel
    GM740566Courtesy of GENERAL MOTORS CORP.
  5. Align the bezel (1) to the switch (3).

    Press the bezel (1) into place until fully seated.

  6. Adjust the seat to the original position.
scientia non olet · About LEMON Manuals