Installation Procedure
WARNING: This page is about a different car, the 2008 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Position the sunroof water gutter to the sunroof window track assembly.
- Pull downward on the front edge of the sunroof water gutter to allow standing bosses to clear the cross-member. Seat the tabs on the sunroof water gutter into the slots in the track assembly, and push the sunroof water gutter forward until the tabs lock into place.
- Ensure that all tabs are secured.
- Install the sunroof water gutter screws.
Tighten: Tighten the screws to 2 N.m (18 lb in).
- Install the sunroof module assembly. Refer Sunroof Module Assembly Replacement .
- Remove the masking tape from the roof panel.
NOTE:
Refer to Fastener Notice
.