LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2007 >> Sky Red Line, Standard >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Rack and Pinion Outer Tie Rod End Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Inner Tie Rod Assembly, Jam Nut, Outer Tie Rod End Stud Nut, Steering Knuckle & Outer Tie Rod End
    GM82236Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Install the steering linkage outer tie rod the same number of full rotations counted when removing.
  1. Install the steering linkage outer tie rod (5) to the steering linkage inner tie rod (1). Do not tighten the steering linkage inner tie rod nut.
  2. Install the steering linkage outer tie rod (5) to the steering knuckle (4).
    3. NOTE: Refer to Fastener Notice .
  3. Install the steering linkage outer tie rod nut (3) to the steering linkage outer tie rod (5).

    Tighten:  Tighten to 30 N.m (22 lb ft) plus an additional 115 degrees.

  4. Tighten the steering linkage inner tie rod nut (2).
  5. Install the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation .
  6. Adjust the wheel toe. Refer to Front Toe Adjustment .
scientia non olet · About LEMON Manuals