LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2007 >> Sky Red Line, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Rear Suspension System) >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page is about a different car, the 2007 Pontiac Montana SV6, 2007 Chevrolet Uplander, and 2007 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications

Application Specification
Metric English
Control Arm Nut * 220 N.m 162 lb ft
Rear Axle Tie Rod Bolt at Axle 125 N.m 92 lb ft
Rear Axle Tie Rod Bolt at Body 135 N.m 100 lb ft
Shock Absorber Bolts 85 N.m 63 lb ft
Wheel Bearing/Hub Bolts (New Only) 80 N.m 59 lb ft
* This is a prevailing torque type fastener. This fastener may be reused ONLY if:
  • The fastener and its counterpart are clean and free from rust.
  • The fastener develops a specified amount of torque (drag) against its counterpart prior to the fastener seating.

    Refer to the appropriate service procedure for the prevailing torque value.


If the fastener does not meet these criteria, REPLACE the fastener.
scientia non olet · About LEMON Manuals