LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2007 >> Sky Red Line, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Front Suspension System) >> Repair Instructions >> Steering Knuckle Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Pontiac Montana SV6, 2007 Chevrolet Uplander, and 2007 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  3. Remove the front wheel drive shaft bearing. Refer to Wheel Bearing/Hub Replacement - Front .
  4. Remove the front lower control arm ball stud. Refer to Lower Control Arm Replacement .
  5. Remove the outer tie rod end from the steering knuckle. Use the J 24319-B  .
    6. Fig 1: Scribing Strut To Knuckle
    GM385558Courtesy of GENERAL MOTORS CORP.
  6. Scribe the strut to the knuckle.
    7. Fig 2: View Of Steering Knuckle To Strut Bolts
    GM385564Courtesy of GENERAL MOTORS CORP.
  7. Remove the bolts connecting the strut to the knuckle.
  8. Remove the knuckle from the vehicle.
scientia non olet · About LEMON Manuals