LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2007 >> Sky Red Line, Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls & Fuel - 2.0L - Introduction (2 Of 2) >> Repair Instructions >> Engine Control Module Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Locating ECM
    GM1828317Courtesy of GENERAL MOTORS CORP.
  1. Using a scan tool, retrieve the percentage of remaining engine oil. Record the remaining engine oil life.
  2. Record the preset radio stations.
  3. Turn the ignition OFF.
  4. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  5. Disconnect the engine harness electrical connectors (1, 3) from engine control module (ECM).
  6. Fig 2: Upper And Lower Retaining Tabs
    GM1828318Courtesy of GENERAL MOTORS CORP.
  7. Release the upper and lower retaining tabs (1, and 2) using a small screwdriver or other suitable tool.
  8. Remove the ECM by lifting upward after releasing the tab.