LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2007 >> Sky Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Current Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Pontiac G5 and 2008 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Battery Current Sensor
    GM1656238Courtesy of GENERAL MOTORS CORP.
  1. Remove the battery to battery tray negative battery cable. Refer to Battery Negative Cable Replacement (Battery to Battery Tray)  or Battery Negative Cable Replacement (Engine to Chassis) .
  2. Remove the tape securing the battery current sensor to the negative battery cable.
  3. Remove the battery current sensor from the negative battery cable.
scientia non olet · About LEMON Manuals