Scan Tool Data Definitions
- Battery Voltage
-
The scan tool displays Normal/Out of Range. This is the current battery voltage available at the body control module (BCM) with normal being between 9 and 16 volts.
- Door Ajar Switch
-
The scan tool displays Door Closed/Door Ajar. The passenger door ajar switch input to the BCM, where an open door is displayed as Door Ajar.
- Door Cylinder Switch
-
The scan tool displays Voltage.
- Door Cylinder Switch
-
The scan tool displays Idle/Lock/Unlock/Invalid. The driver door key cylinder switch state.
- Driver Door Ajar Sw.
-
The scan tool displays Door Closed/Door Ajar. The driver door ajar switch input to the BCM, where an open door is displayed as Door Ajar.
- Driver Door Lock Actuator Command
-
The scan tool displays Idle/Lock/Unlock/Invalid. The state of the driver door lock actuator output.
- Passenger Doors Lock Actuator Command
-
The scan tool displays Idle/Lock/Unlock/Invalid. The state of the passenger door lock actuators outputs.
- Trunk Ajar Switch
-
The scan tool displays the status of the trunk ajar switch.
- Trunk Motor
-
The scan tool displays the current state of the trunk release motor.
- Trunk Release Solenoid Command
-
The scan too displays the status of the truck release solenoid output control.
- Trunk Release Switch
-
The scan tool displays the status of the trunk release switch input.