Installation Procedure
WARNING: This page is about a different car, the 2007 Pontiac Montana SV6, 2007 Chevrolet Uplander, and 2007 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
- Route the antenna base and cable assembly as noted in the removal.
- Connect the antenna cable to the antenna extension lead.
- Install the cowl side trim panel. Refer to Cowl Side Trim Panel Replacement .
- Install the instrument panel insulator. Refer to Instrument Panel Insulator Panel Replacement .
- Tighten the locking nut in order to secure the antenna base to the fender.
Tighten: Tighten the nut to 5 N.m (44 lb in).
- Install the antenna mast.
NOTE:
Refer to Fastener Notice
.