Circuit/System Testing
WARNING: This page is about a different car, the 2007 Pontiac Montana SV6, 2007 Chevrolet Uplander, and 2007 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness connector at the RCDLR.
- Ignition ON, verify that a test lamp does not illuminate between the keyless entry serial data circuit and ground.
- If the test lamp does illuminate, test the keyless entry serial data circuit for a short to voltage. If the circuit tests normal, replace the BCM.
- If all circuits test normal, test or replace the RCDLR.