Installation Procedure
WARNING: This page is about a different car, the 2007 Pontiac Montana SV6, 2007 Chevrolet Uplander, and 2007 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
- Position the left hand side weatherstrip end 50 mm (1.96 in) from the lower forward corner of the window opening.
- Using a roller-type tool, begin at (2) and roll the weatherstrip (1) forward up the vertical window opening edge on the pinchweld and continue around the periphery of the entire flange back to (2).
- Ensure there are no wrinkles and the window corners are secured to the flange radius.
- Install the body side quarter window into the opening. Refer to Quarter Window Replacement (Without A20 Manual) or Quarter Window Replacement (With A20 Power) .
IMPORTANT:
The weatherstrip marked as LH has 2 yellow dots and the weatherstrip marked RH has 2 pink dots at the joint (2).