Installation Procedure
WARNING: This page is about a different car, the 2007 Pontiac Montana SV6, 2007 Chevrolet Uplander, and 2007 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
- Position the front door window run channel to the front door.
- Position the front door window run channel to the front door window weatherstrip, pressing in until fully seated.
- Install the front door window run channel screws.
Tighten: Tighten the screws to 10 N.m (89 lb in).
- Install the front door speaker. Refer to Radio Front Speaker Replacement .
- Install the front door water deflector. Refer to Front Side Door Water Deflector Replacement .
NOTE:
Refer to Fastener Notice
.