Test Description
The numbers below refer to the step numbers on the diagnostic table.
- 2: This step tests for mechanical damage to automatic level control sensor link.
- 3: Automatic level control sensor replacement.
DTC 013
| Step | Action | Yes | No |
|---|---|---|---|
| Schematic Reference: Automatic Level Control Schematics | |||
| 1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | Go to Diagnostic System Check - Vehicle |
| 2 | Inspect the automatic level control sensor link for damage or being disconnected. Did you find and correct the condition? |
Go to Step 4 | Go to Step 3 |
| 3 | Replace the automatic level control sensor. Refer to Automatic Level Control Sensor Replacement (IRS) or Automatic Level Control Sensor Replacement (Twist Axle) . Did you complete the replacement? |
Go to Step 4 | - |
| 4 | Operate the vehicle within the Conditions for Running the DTC as specified in the supporting text. Does the DTC reset? |
Go to Step 2 | System OK |