Wiper Motor Replacement

WARNING: This page is about a different car, the 2007 Saturn Outlook. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Windshield Wiper Motor

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the windshield wiper motor module. Refer to Wiper Motor Module Replacement .
1	Wiper Motor Bolt (Qty: 3) NOTE: Refer to Fastener Notice . Tighten: 10 N.m (89 lb in)
2	Wiper Motor Kit Procedure Using the J 39232 Wiper Linkage Separator or equivalent, separate the transmission arm socket from the ball stud on the crank arm. See Special Tools . Using the J 39529 Wiper Linkage Installer or equivalent, secure the ball stud on the crank arm to the transmission arm socket. See Special Tools .

Callout

Component Name

Preliminary Procedure:
Remove the windshield wiper motor module. Refer to Wiper Motor Module Replacement .

Wiper Motor Bolt (Qty: 3)

NOTE: Refer to Fastener Notice .

Tighten: 10 N.m (89 lb in)

Wiper Motor Kit

Procedure

Using the J 39232 Wiper Linkage Separator or equivalent, separate the transmission arm socket from the ball stud on the crank arm. See Special Tools .
Using the J 39529 Wiper Linkage Installer or equivalent, secure the ball stud on the crank arm to the transmission arm socket. See Special Tools .