Data Display/Body Rear End

WARNING: This page is about a different car, the 2007 Saturn Outlook. However, it is still accessible from the selected car via links, so may be relevant.

Endgate Handle Sw: The scan tool displays Active/Inactive. The scan tool displays the status of the endgate handle switch and the endgate close switch.
Endgate Lock Status: This parameter indicates the status of the endgate as either being Locked or Unlocked.
Endgate Release Cmd: The scan tool displays On/Off. The scan tool displays the commanded state of the release portion of the endgate latch.
Ext. Trunk/Liftglass Rel. Sw: The scan tool displays Active/Inactive. Active is displayed when the liftglass release switch is being pressed and Inactive is displayed when the liftgate release switch in not being pressed.
Int. Trunk/Liftglass Sw: The scan tool displays Active/Inactive. The scan tool displays the status of the interior liftglass release switch.
Liftgate Handle Sw: The scan tool displays Active/Inactive. The scan tool displays the status of the liftgate handle switch and the liftgate close switch.
Liftgate Lock Status: This parameter indicates the status of the liftgate as either being Locked or Unlocked.
Liftgate Release Cmd: The scan tool displays On/Off. The scan tool displays the commanded state of the release portion of the liftgate latch.
Liftglass Release Cmd: The scan tool displays On/Off. The scan tool displays the commanded state of the release portion of the liftglass latch.
Rear Cargo Lock Sw: The scan tool displays Active/Inactive. The vehicle liftgate lock switch inputs to the body control module (BCM), where a switch transition to the Lock position is displayed as Active.
Rear Cargo Unlock Sw: The scan tool displays Active/Inactive. The vehicle liftgate lock switch inputs to the BCM, where a switch transition to the Unlock position is displayed as Active.
Rear Closure Cyl. Unlock Sw: This parameter indicates the current status of the liftgate cylinder unlock switch as being Active or Inactive.
Rear Closure Open Sw: The scan tool displays Active/Inactive. The scan tool displays the status of the liftgate open switch.
Rear Closure Ajar Sw: The scan tool displays Active/Inactive. The scan tool displays the state of the liftgate ajar switch as seen at the rear integration module.