Component Testing
WARNING: This page is about a different car, the 2007 Saturn Outlook. However, it is still accessible from the selected car via links, so may be relevant.
- Install a 30-amp fused jumper wire between the control terminal 1 and 12 volts. Momentarily install a jumper wire between the control terminal 2 and ground. The liftgate motor should perform the OPEN or CLOSE function.
- If the function does not perform as specified, replace the liftgate motor assembly.
- Reverse the jumper wires, the liftgate motor should perform the CLOSE or OPEN function.
- If the function does not perform as specified, replace the liftgate motor assembly.