LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2007 >> Relay 3.9 1 >> Repair and Diagnosis >> External Pages >> Different car >> Section 128 (Engine Exhaust System) >> Repair Instructions >> Catalytic Converter Heat Shield Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Monte Carlo and 2007 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the catalytic converter heat shield to the underbody.
    Fig 1: View Of Catalytic Converter Heat Shield
    GM1553100Courtesy of GENERAL MOTORS CORP.
  2. Install NEW catalytic converter heat shield rivets.
  3. Install the HO2S wiring harness from the clips on the catalytic converter heat shield.
    Fig 2: View Of Bank 2 Sensor 2 Electrical Harness Connector
    GM1553099Courtesy of GENERAL MOTORS CORP.
  4. Install the catalytic converter. Refer to Catalytic Converter Replacement (RPO LS4)  or Catalytic Converter Replacement (RPOs LZE/LZ4/LZ8) .
scientia non olet · About LEMON Manuals