LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2007 >> Relay 3.9 1 >> Repair and Diagnosis >> External Pages >> Different car >> Section 104 (Engine Cooling System) >> Repair Instructions >> Engine Oil Cooler Hose/Pipe Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Monte Carlo and 2007 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the engine oil cooler lines to the vehicle.
  2. Install the engine oil cooler lines to the engine oil cooler. Refer to Engine Oil Cooler Pipe/Hose Quick Connect Fitting .
    Fig 1: View Of Engine Oil Cooler Lines
    GM1335222Courtesy of GENERAL MOTORS CORP.
  3. Install the engine oil cooler lines to the engine oil filter adapter. Refer to Engine Oil Cooler Pipe/Hose Quick Connect Fitting .
  4. Install the engine oil cooler line support clip to the engine oil cooler lines.
  5. Install the right engine splash shield. Refer to Splash Shield Replacement - Engine (Right) or Splash Shield Replacement - Engine (Left) .
  6. Install the lower air baffle. Refer to Radiator Air Lower Baffle and Deflector Replacement .
  7. Add the proper amount of engine oil.
scientia non olet · About LEMON Manuals