LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2007 >> Relay 3.9 1 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - Introduction (2 Of 2) >> Repair Instructions >> Fuel Tank Replacement (Long Wheel Base) >> Assembly Procedure

Assembly Procedure

    Fig 1: Locating Fuel Tank And EVAP Components
    GM1544795Courtesy of GENERAL MOTORS CORP.
  1. Install the EVAP purge pipe (6) into the fuel tank clip.
  2. Install the fuel feed pipe (1) into the fuel tank pipe clips.
  3. Install the fuel tank module (4). Refer to Fuel Tank Module Replacement (Long Wheel Base)  or Fuel Tank Module Replacement (Short Wheel Base) .
  4. Install the EVAP canister vent valve (3). Refer to Evaporative Emission Canister Vent Solenoid Valve Replacement (Long Wheel Base)  or Evaporative Emission Canister Vent Solenoid Valve Replacement (Short Wheel Base) .
  5. Install the EVAP canister (2). Refer to Evaporative Emission Canister Replacement (Short Wheel Base)  or Evaporative Emission Canister Replacement (Long Wheel Base) .
scientia non olet · About LEMON Manuals