LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2007 >> Relay 3.9 1 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - Introduction (2 Of 2) >> Repair Instructions >> Crankshaft Position Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Crankshaft Position (CKP) Sensor
    GM1712672Courtesy of GENERAL MOTORS CORP.
  1. Lubricate the CKP sensor O-ring with clean engine oil.
  2. Install the CKP sensor (1).
    3. NOTE: Refer to Fastener Notice .
  3. Install the CKP sensor stud (2).

    Tighten:  Tighten the stud to 10 N.m (89 lb in).

  4. Connect the engine harness electrical connector to the CKP sensor.
  5. Install the exhaust manifold. Refer to Exhaust Manifold Replacement - Right Side .
scientia non olet · About LEMON Manuals