LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2007 >> Relay 3.9 1 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - Introduction (2 Of 2) >> Repair Instructions >> Air Cleaner Outlet Duct Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Engine Harness connector At Mass Air Flow (MAF)/intake Air Temperature (IAT) Sensor
    GM1677915Courtesy of GENERAL MOTORS CORP.
  1. Install the air cleaner outlet duct to the air cleaner housing and throttle body.
  2. Tighten the air cleaner outlet duct clamp at the throttle body.
    3. NOTE: Refer to Fastener Notice .
  3. Tighten the air cleaner outlet duct clamp at the MAF/IAT sensor.

    Tighten:  Tighten the clamps to 2 N.m (18 lb in).

  4. Connect the PCV fresh air tube to the air cleaner outlet duct. Refer to Plastic Collar Quick Connect Fitting Service .
  5. Install the intake manifold cover, if necessary. Refer to Intake Manifold Cover Replacement .
scientia non olet · About LEMON Manuals