LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2007 >> Relay 3.9 1 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - DTC P0010 To DTC P0420 >> DTC P0335 or P0336 >> Component Test

Component Test

  1. Inspect the CKP sensor for looseness and correct installation. Remove the CMP sensor from the engine and inspect the sensor and the O-ring for damage.
    • If the sensor is loose, incorrectly installed, or damaged; repair or replace the CKP sensor.
  2. Connect the CKP Sensor connector to the CKP Sensor; turn ON the ignition, with the engine OFF.
  3. Observe the CKP Active Counter parameter on the scan tool; pass a steel object by the tip of the sensor repeatedly. The CKP Active Counter parameter should increment.
    • If the parameter does not increment, replace the CMP sensor.
scientia non olet · About LEMON Manuals